Search Site

Vehicle Loop Dectector

Availability: In stock

$94.87
OR

Quick Overview

For use as an opening or reversing device. Two detectors required for opening and for reversal. These detectors will open when a steel object crosses over loop

Vehicle Loop Dectector

More Views

Details

Power: The detector is available in the following voltages, 12V AC/DC, 24V AC, 24V DC, 110 AC.
Low Power: Detector is availabe with maximum current draw of 60mA
Temperature: -40 F to +180 F
Environmental Protection Circuit Board is conformally Coated
Enclosure: Extruded anodized aluminum,
Height= 3.25 inches 83 mm - Width= 2.56 inches 40 mm- Depth = 3.65 inches 90 mm

Output Relays 5A/125 V AC standard version, 1A/125 V AC low current version
Connector: 86 CP11 compatible with 11 pin Octal DIN rail mountable socket or wire harness
Surge Protection: The detector is protected with neon discharge lamps, zenner diods and surg arrestors
Loop Input: Transformer isolated
Grounded Loop: The Loop insolation transformer allows operation with poor quality loops
Loop Inductance Range 20 to 2000 microhenries with Q factor of 5 or higher
Tuning: Detector automatically tunes to the loop after power application or reset
Tracking: Detector automatically tracks and compensates for environmental changes
Power Indicator: Green LED solid light indicates power
Loop Failure Indicator: Green LED blinks indicates loop problem
Loop Failure Memory: Green LED blinks with fast consective blinks indicates past loop problem that healed
Detect Indicator: Red LED Solid light indicates detection
Extend Indicator: Red LED Blinks after a car left the loop indicates time extend feature
Sensitivity: Is set by 10 position rotary switch
Frequency: Is set three positon toggle switch
Infinite Presence Mode: DIP switch selectable presence
Limited 4 Minutes: DIP switch selectable presence
Presence Time: DIP switch selectable
Secod Presence Relay: DIP switch selectable
Pulse on Exit / Entry: DIP switch selectable
Fail Safe / Secure: DIP switch selectable
Filter: DIP switch selectable 2 Seconds
Extended Detection: DIP switch selectable 3, 6, and 9 seconds

Additional Information

SKU DF-MVPDTEK