Gate Closer for Chain link gates, most gates need at least 2 closers.
Spring Type, Die-Cast Aluminum
Pressed Steel - Galvanized
Fits 1 3/8" Gate Frame
NOTE: Non-Returnable! Please measure post for correct size.
PLEASE NOTE: Do NOT over tighten your gate closer, in most cases the ends will NOT meet. Each gate closer is spring-activated and sensitive to pressure. Tightening the gate closer too much and opening the gate too wide may result in spring damage. It is strongly recommended that you do not over tighten your gate closer. Overtightened gate closesers will NOT be replaced. This is older technology, most customers are upgrading their gate hinges to helf closing hinges see part number : CH200FR
Please Note: The product you receive may not match the pictured, due to manufacturing difference